Please check the following items on receipt.
Read carefully the testing records.
Check and see whether the motors are damaged or dirtied;and make sure there is no part or accessory missing and no foreign body in the motors.
Run the motor and make sure the direction of rotation agrees with that indicated, if there is such an indication . The direction is always indicated by an arrow plate attached on the motor.
Read carefully the ratings on the main nameplate and other plates or attached pamphlets.
Rotate the shaft manually and make sure it rotates normally. (To prevent against axial movement of rotors and damages to roller bearings, the shafts of motors of 2 poles and motors with roller bearings are locked during transport. Please unlock them before rotating .)
If there are some special requirements, such as, certain particular color, paint, and accessories, please check to see whether they are satisfied.
In case there is any problem or discrepancy found , please contact Tatung Company or its service station nearest to you , and give us the following in-formation: The type, poles,output capacity, voltage and frequency shown on the nameplate; also the test number and manufacture number (they are either marked on nameplate or on the endface of shaft).
If you are a machine manufacturer , Please pay your attention to the following :
In case the rotors of Tatung motors you received have been locked for above-stated purpose, you are required to lock the rotors again, either by the means described above or by the means shown below:
